Air Cleaner Housing: Service and Repair

Air Cleaner Housing With Intake Air Temperature Sensor:

Air Cleaner Housing:

Removal Proceduree
1. Remove the air cleaner intake air duct from the mass air flow sensor.
2. Lift the air inlet assembly on the front end sheet metal by pulling straight up.
3. Slide tab on bottom of air cleaner up from the slot on top of air inlet duct assembly to unseat the air cleaner.
4. Remove the Intake Air Temperature sensor.
5. Remove the air cleaner element.
6. Remove the air cleaner element assembly.

Installation Procedure
1. Install the air cleaner element assembly.
2. Install the air cleaner element.
3. Slide tab on bottom of air cleaner up from the slot on top of air inlet duct assembly to unseat the air cleaner.
4. Install the Intake Air Temperature sensor.
5. Install the air inlet assembly on the front end sheet metal.
6. Install the air cleaner rear air duct from the mass air flow sensor. Tighten the clamp assembly to 3.5 Nm (31 lb in).