System Tests Self Diagnostic Features

System Tests Allow for the display of values as actually seen or commanded by the various systems (i.e. PCM, IPC, ACM, SDM, TCS, RSS, PZM, IRC, RFA, CCP or PHN). The Test Types available are dependent upon the system selected, but may Include the following:
^ Data (analog Inputs): Displays analog values as seen by the system.
^ Inputs (Digital Inputs): Displays digital values as seen by the system and provides an indication of whether the input has cycled.
^ Outputs (Digital Outputs): Cycles digital outputs controlled by the system off/on for 3 seconds each Cycle.
^ Overrides (analog Outputs): Allows for analog outputs of the system to be set at a desired value.
^ Clear Codes: Will erase all DTCs stored for the system currently selected (Note: if the Malfunction is still present, the DTC may immediately reset).