Rear Suspension

REMOVE OR DISCONNECT
1. Raise vehicle.
2. Wheel and tire on both sides.
3. Link lower bolt on both sides.
4. Link upper nut on both sides.
5. Stabilizer brackets.
6. Insulators from stabilizer shaft.
7. Lower exhaust system at rear and support.
8. Stabilizer shaft from vehicle.

INSTALL OR CONNECT
1. Stabilizer shaft into vehicle.
2. Exhaust system.
3. Insulators to stabilizer shaft.
4. Stabilizer brackets.
5. Link upper nut both sides.
6. Link lower bolt both sides.
^ Tighten:
- Upper link nut to 52 Nm (38 ft. lbs.).
- Lower link bolt to 60 Nm (44 ft. lbs.).
- Stabilizer bracket bolt to 60 Nm (44 ft. lbs.).
7. Wheel and tire.
^ Tighten the wheel nuts to 140 Nm (100 ft. lbs.).
8. Lower vehicle.