Fastener Tightening Specifications - Unit Repair

Bolt:
Case Cover to:
Case (46) 20 - 27 N.m (15 - 20 lb. ft.)
Driven Sprocket Support (48) 20 - 27 N.m (15 - 20 lb. ft.)
Case (50) 27 - 31 N.m (20 - 23 lb. ft.)
Scavenge Pump Cover To:
Scavenge Pump Body (226) 11 - 13 N.m (8 - 9.5 lb. ft.)
Pump Assembly To:
Case (229) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case (231) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case Cover (232) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case Cover (233) 11 - 13 N.m (8 - 9.5 lb. ft.)
Secondary Pump To:
Case Cover (234) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case Cover (235) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case (331) 11 - 13 N.m (8 - 9.5 lb. ft.)
UCVB To:
Pressure Control Solenoid Bracket (15) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case (229) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case Cover (329) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case Cover (330) 11 - 13 N.m (8 - 9.5 lb. ft.)
Case (331) 11 - 13 N.m (8 - 9.5 lb. ft.)
Driven Sprocket Support (331) 11 - 13 N.m (8 - 9.5 lb. ft.)
Channel Plate To Case (534) 8 - 14 N.m (6 - 10 lb. ft.)
Oil Transfer Plate To Case (534) 8 - 14 N.m (6 - 10 lb. ft.)
Channel Plate To:
Case (958) 8 - 14 N.m (6 - 10 lb. ft.)
LCVB (534) 8 - 14 N.m (6 - 10 lb. ft.)
Accumulator Housing (534) 8 - 14 N.m (6 - 10 lb. ft.)
Accumulator Housing To
Channel Plate (534) 8 - 14 N.m (6 - 10 lb. ft.)
LCVB To Channel Plate (938) 8 - 14 N.m (6 - 10 lb. ft.)
Spacer Plate Support To:
Channel Plate (939) 8 - 14 N.m (6 - 10 lb. ft.)
LCVB To:
Channel Plate (940) 8 - 14 N.m (6 - 10 lb. ft.)
Channel Plate (941) 8 - 14 N.m (6 - 10 lb. ft.)
Accumulator Housing To:
Channel Plate (951) 8 - 14 N.m (6 - 10 lb. ft.)
Channel Plate (952) 8 - 14 N.m (6 - 10 lb. ft.)
Channel Plate (954) 8 - 14 N.m (6 - 10 lb. ft.)
Accumulator Housing Cover (956) 8 - 14 N.m (6 - 10 lb. ft.)
Side Cover To:
Case Cover (28) 50 - 55 N.m (37 - 40 lb. ft.)
Case Cover (32) 20 - 27 N.m (15 20 lb. ft.)
Bottom Pan To Case (62) 10 - 12 N.m (8 - 9 lb. ft.)
Case Extension To Case (128) 50 - 55 N.m (37 - 40 lb. ft.)
Case Extension To Case (129) 20 - 27 N.m (15 - 20 lb. ft.)
Differential To Final Drive Carrier (119) 70 - 76 N.m (52 - 56 lb. ft.)
Scavenge Tube To Case (15) 8 - 14 N.m (6 - 10 lb. ft.)
Input Speed Sensor To Case (15) 11 - 13 N.m (8 - 9.5 lb. ft.)
Detent Lever And Roller Assembly (26) 8 - 14 N.m (6 - 10 lb. ft.)
Speed Sensor To Case Extension (131) 8 - 14 N.m (6 - 10 lb. ft.)
Drive Sprocket Support To Case (404) 11 - 13 N.m (8 - 9.5 lb. ft.)
Servo Cover To Case (534) 8 - 14 N.m (6 - 10 lb. ft.)
Cooler connector, return (case) (3) 25 - 29 N.m (19 - 21 lb. ft.)
Cooler connector To:
Cooler (cover) (38) 20 - 27 N.m (15 - 20 lb. ft.)
Nut:
Channel Plate To Case (955) 8 - 14 N.m (6 - 10 lb. ft.)
Manual Shaft To Detent Lever (18) 27 - 34 N.m (20 - 25 lb. ft.)
Plug:
Oil Drain - bottom Pan To Case Cover (8) 8 - 14 N.m (6 - 10 lb. ft.)
Oil Test - #40 TORX (case Cover) (40) 18 - 26 N.m (13.5 - 19 lb. ft.)
Stud Case Cover To Case (45) 20 - 27 N.m (15 - 20 lb. ft.)
Stud:
Case Cover To Case (47) 27 - 31 N.m (20 - 23 lb. ft.)
Case Cover To Case (49) 27 - 31 N.m (20 - 23 lb. ft.)
Case Cover To Case (67) 27 - 31 N.m (20 - 23 lb. ft.)
Side Cover To Case Cover (66) 50 55 N.m (37 - 40 lb. ft.)
Case Extension To Case (127) 50 - 55 N.m (37 - 40 lb. ft.)
Case To Forward Clutch Support (5) 25 - 27 N.m (19 - 20 lb. ft.)
Temperature sensor (350) 3.4 N.m (30 lb. ft.)