Wiper Motor Cover Replacement

Wiper Motor Cover Assembly Replacement:

Remove or Disconnect
1. Negative battery cable.
2. Electrical connectors from cover assembly (28) and wiper motor (29).
3. Three screws (27).
4. Cover assembly (28).

Install or Connect
NOTICE: Refer to Service Precautions.
1. Cover assembly (28).

Important
^ Always install cover assembly with wiper motor (29) in park position and drive pin in the open area of the cam.

2. Three screws (27).

Tighten
^ Screws (27) to 2 N.m (18 lb. in.).

3. Electrical connectors.
4. Negative battery cable.