Express Feature

The sunroof control module enters express open or express close vent mode when terminal 6 is momentarily grounded through CKT 100 (BRN) by the sunroof switch. The control module then applies voltage through CKT 129 (LT GRN) and ground through CKT 127 (DK GRN) to the sunroof actuator assembly. The sunroof control module drives the sunroof actuator until:
^ Motor stall is sensed.
^ The sunroof switch is moved to the OPEN/CLOSE VENT position.
^ The sunroof switch is moved to the CLOSE/OPEN VENT position.
^ The control module times out (20 seconds after the start of the express mode).
^ The limit switch is closed.