Troubleshooting Hints - Memory Seats

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
1. Check Trunk Compartment Fuse Block BATT Fuse by visual inspection.
2. Check Engine Compartment Fuse/Relay Center MIRROR Fuse by visual inspection.
3. Check LH MaxiFuse(R) Block SEATS Circuit Breaker by visual inspection.
4. Make sure that grounds G205, G204 and G302 are clean and tight.
5. If seat motor internal circuit breaker trips, it will not reset until voltage is removed from motor.
6. Before component replacement, check that system connections are clean and tight.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction hut prove "GOOD" in a continuity/voltage check with a system disconnected. These circuit relay be intermittent or resistive when loaded. and if possible, should he checked by monitoring for a voltage drop with the system operational under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.