Channel Plate Inspect and Assemble

CHANNEL PLATE INSPECT AND ASSEMBLE 4T80-E TRANSAXLE


^ Tools Required
- J 39630-1 Guide Pins
- J 39630-2 Guide Pins





1. Inspect the lower channel plate accumulator bores and mating surfaces for scratches or damage





2. Inspect the bottom side of the lower channel plate for damage to the bolt holes or debris in passages.





3. Insert the J39630-1 guide pins into the lower channel plate. Then rest the channel plate on the pin heads.
4. Install the J 39630-2 guide pins into the channel plate.
5. Install the spacer plate, gasket assembly (935) onto the lower channel plate (900). Install the spacer plate support cover (937) and install the three spacer plate support cover bolts (939).

Tighten
- Tighten the bolts in a start pattern to 8-14 N.m (6-10 lb. ft).