Fastener Tightening Specifications - On-Vehicle

Accumulator Housing:
Cover Bolt 8-14 Nm (6-10 lb ft)
To Channel Plate Bolt 8-14 Nm (6-10 lb ft)
Case Cover To:
Bottom Pan To Case Bolt 10-12 Nm (8-9 lb ft)
Case Bolt 20-27 Nm (15-20 lb ft)
Case Bolt 27-31 Nm (20-23 lb ft)
Case Stud 20-27 Nm (15-20 lb ft)
Case Stud 27-31 Nm (20-23 lb ft)
Driven Sprocket Support Bolt 20-27 Nm (15-20 lb ft)
Case Extension To:
Case Bolt 20-27 Nm (15-20 lb ft)
Case Bolt 50-55 Nm (37-40 lb ft)
Case Stud 50-55 Nm (37-40 lb ft)
Case To Forward Clutch Support Stud 25-27 Nm (19-20 lb ft)
Channel Plate To:
Accumulator Housing Bolt 8-14 Nm (6-10 lb ft)
Case Bolt 8-14 Nm (6-10 lb ft)
Case Nut 8-14 Nm (6-10 lb ft)
LCVB Bolt 8-14 Nm (6-10 lb ft)
Cooler Connector:
Return (Case) 25-29 Nm (19-21 lb ft)
To Cooler (Case Cover) 20-27 Nm (15-20 lb ft)
Detent Lever And Roller Assembly Bolt 8-14 Nm (6-10 lb ft)
Differential To Final Drive Carrier Bolt 70-76 Nm (52-56 lb ft)
Drive Sprocket Support To Case Bolt 11-13 Nm (8-9.5 lb ft)
Input Speed Sensor To Case Bolt 11-13 Nm (8-9.5 lb ft)
LCVB To Channel Plate Bolt 8-14 Nm (6-10 lb ft)
Manual Shaft To Detent Lever Nut 27-34 Nm (20-25 lb ft)
Oil:
Drain-Bottom Pan To Case Cover Plug 8-14 Nm (6-10 lb ft)
Test Plug - #40 TORX (Case Cover) 18-26 Nm (13.5-19 lb ft)
Transfer Plate To Case Bolt 8-14 Nm (6-10 lb ft)
Pressure Control Solenoid Bracket To:
UCVB Bolt 11-13 Nm (8-9.5 lb ft)
Pump Assembly To Case:
Bolt 11-13 Nm (8-9.5 lb ft)
Cover Bolt 11-13 Nm (8-9.5 lb ft)
Scavenge:
Pump Cover To Scavenge Pump Body Bolt 11-13 Nm (8-9.5 lb ft)
Tube To Case Bolt 8-14 Nm (6-10 lb ft)
Secondary Pump To Case:
Bolt 11-13 Nm (8-9.5 lb ft)
Cover Bolt 11-13 Nm (8-9.5 lb ft)
Servo Cover To Case Bolt 8-14 Nm (6-10 lb ft)
Side Cover To Case Cover:
Bolt 20-27 Nm (15-20 lb ft)
Bolt 50-55 Nm (37-40 lb ft)
Stud 50-55 Nm (37-40 lb ft)
Spacer Plate Support To Channel Plate Bolt 8-14 Nm (6-10 lb ft)
Speed Sensor To Case Extension Bolt 8-14 Nm (6-10 lb ft)
Temperature Sensor 3.4 Nm (30 lb in)
UCVB To:
Case Bolt 11-13 Nm (8-9.5 lb ft)
Case Cover Bolt 11-13 Nm (8-9.5 lb ft)
Driven Sprocket Support Bolt 11-13 Nm (8-9.5 lb ft)