Forward Clutch ASM and Low Reverse Band Removal

^ Tool Required
- J 39053 Forward and Coast Clutch Assembly Puller





1. Remove the two 13-mm forward clutch support bolts (5) from the case.





Caution: The forward and coast clutch assembly weighs approximately 50 lbs. Personal Injury may result If you drop the assembly.

2. Install the J 39053 forward and coast clutch assembly puller. Using a chain hoist or suitable lifting equipment, secure and lift the forward and coast clutch assembly (626-834) out of the case.





3. Remove the fretting ring (835).
4. Remove the Lo and Reverse band (13).