Arming the System

Perform the following steps to enable the normal arming procedure when exiting the vehicle:
1. Close all the windows.
2. Place the shift lever in the PARK position.
3. Turn the ignition switch to the LOCK position.
4. Remove the ignition key
5. Open any door.
6. Use the power door lock switch or use the transmitter LOCK button to lock the doors.
7. Close the doors to initiate the following conditions:
7.1. Tile SECURITY lamp illuminates solid on the dash for 30 seconds.
7.2. The system is fully armed once the SECURITY lamp goes out.