Rear Quarter Upper Trim Panel

REMOVAL PROCEDURE
1. Lower the rear seatback cushion.
2. Remove the roof rail courtesy reading lamp.
3. Remove the rear seatback outer cushion.
4. Remove the bolt from the rear seat shoulder height adjuster.
5. Remove the screws cover.
6. Remove the screws.
7. Remove the rear quarter trim finish panel. Pull back on the rear quarter trim finish panel in order to release the clips on the backside.

INSTALLATION PROCEDURE
1. Install the rear quarter trim finish panel.
Push in on the rear quarter trim finish panel in order to insert clips.
2. Install the screws.

Tighten
Tighten the rear quarter trim finish panel screw until fully seated and not stripped.

3. Install the screws cover.
4. Install the bolt from the rear seat shoulder height adjuster.
5. Install the rear seatback outer cushion.
6. Install the roof rail courtesy reading lamp.
7. Raise the rear seatback cushion.