Programming the Driver Seat Adjuster Memory Module

PROGRAMMING THE MEMORY SEAT POSITIONS
The driver seat adjuster memory module can be programmed for three memory positions. The driver seat, the LH and RH outside rear view mirrors and the inside rear view mirror can be programmed to the three different positions. The following instructions are for programming the memory seat positions:
1. Turn the ignition switch to the ON position.
2. Adjust the driver's seat to a comfortable position.
3. Also adjust the inside and outside rear view mirrors to a comfortable position.
4. Press the memory button and the number one button at the same time. This stores the position of the driver seat, the inside rear view mirror and the outside rear view mirrors in the driver seat adjuster memory module.
5. The driver seat and mirrors can be programmed for 2 additional drivers by repeating the above steps and pressing the number 2 or 3 instead of number 1.