Retained Accessory Power (RAP)

The Retained Accessory Power (RAP) feature allows the use of the entertainment/phone system after the ignition is turned Off. The BCM controls this feature via the serial data circuit.

The RAP feature disables after the following occurs:
^ After 10 minutes with the ignition switch in the Lock position.
^ With the ignition switch in the Lock position and a door is opened. The RAP feature will not enable with the door open after the ignition is turned to the Lock position.
^ The ignition switch transistions to the Start position.

The following are the remaining operations and the features that the BCM controls:
^ All door lock/unlock operations including the following features:
- The Remote Keyless Entry.
- The Fuel Lid Unlock.
- The Trunk Release.
^ The Exterior Lighting Control including the following features:
- The Daytime Running Light.
- The Twilight Sentinel.
- The Wiper On Lighting Control.
- The Exterior Lighting Power Control.
^ The Delayed Interior Lighting Control.
^ The Content Theft Deterrent.
^ The various telltale controls in the Instrument Cluster.
^ The various telltale controls in the Headlamp Switch.
^ The Class 2 diagnostic protocol.