Removal Procedure

1. Disable the SIR system. Refer to Disabling the SIR System.
2. Remove the center console (1). Refer to Instrument Panel, Gages and Console.





3. Release the inflatable restraint Sensing and Diagnostic and Seat Belt Pretensioner Module (SDM) harness connector Connector Position Assurance (CPA) (4) by pushing in the locking tab (3).
4. Disconnect the SDM harness connector (5) from the SDM (1).

Description:

5. Remove the fasteners (1) from the SDM.
6. Remove the SDM from the vehicle.