P1610
Refer to Data Link Connector Diagrams for wiring views.
CIRCUIT DESCRIPTION
This diagnostic test checks for the loss of or invalid Platform Zone Module (PZM or body control module) serial data to the PCM. When such a condition exists for 11 seconds DTC P1610 is set.
CONDITIONS FOR RUNNING THE DTC
DTC P0322 is not set.
CONDITIONS FOR SETTING THE DTC
^ Ignition switch ON for 5 seconds and PCM not receiving PZM data.
OR
^ PCM unable to communicate with the PZM for at least 11 seconds.
ACTION TAKEN WHEN THE DTC SETS
^ The Malfunction Indicator Lamp (MIL) will not illuminate.
^ No message will be displayed.
CONDITIONS FOR CLEARING THE DTC
^ A History DTC will clear after forty consecutive warm-up cycles with no failures of any non-emission related diagnostic test.
^ A Last Test Failed (current) DTC will clear when the diagnostic runs and does not fail.
^ PCM battery voltage is interrupted. Using a Scan tool.