Training GDO for Rolling Code Receivers

This procedure is for training the customer's rolling code garage door openers to the garage door opener (GDO) transmitter. The GDO must already be programmed to the hand-held transmitter. The training process below must be completed within 30 seconds or the training process must be repeated.
1. Locate the TRAIN button on the garage door opener receiver. (Reference the operator's manual for the garage door opener or call 1-800-355-3515 for assistance). Follow instructions for the garage door opener in order to know when the unit is in train mode.
2. Return to the GDO transmitter in the vehicle and press the button that you want programmed 3 times for the button (1 second each time).
3. Re-press the button in order to verify that the GDO transmitter is programmed.

You may use either the hand-held transmitter or the GDO in order to open the garage door.

The GDO is compatible with most, but not all types and brands of transmitters. If a compatibility conflict occurs with a transmitter, call HomeLink(TM) at
1-800-355-3515.