Compressor Replacement

Compressor Bracket:

Compressor Mounting:

Compressor Splash Shield:

A/C Compressor Block Fitting:

Remove or Disconnect

1. Recover refrigerant.
2. Accessory drive belt.
3. Right wheel.
4. Compressor splash shield.
5. Engine splash shield and retainer.
6. Engine oil filter.
7. Oil cooler lines at oil filter adapter.
8. Compressor electrical connection.
9. One bolt securing compressor hose assembly.
10. Compressor from mounting bracket.
11. Mounting bracket and brace from engine.

Install or Connect

1. Compressor mountin2 bracket to vehicle.

Tighten
^ Front bracket bolts 50 N.m (38 lb. ft.).
^ Rear bracket stud 24 N.m (18 lb. ft.).
^ Rear bracket nuts 50 N.m (38 lb. ft.).

2. Compressor to vehicle.

Tighten
^ Rear mounting bolts 25 N.m (20 lb. ft.).
^ Front mounting bolts 50 N.m (38 lb. ft.).

3. Compressor hose assembly.

Tighten
^ Compressor hose bolt to 33 N.m (24 lb. ft.).

4. Compressor electrical connection.
5. Oil cooler lines at oil filter adapter.
6. Engine oil filter.
7. Compressor and engine splash shields.
8. Right wheel.
^ Lower the vehicle.
9. Accessory drive belt.
10. Evacuate and charge system.
11. Leak test all refrigerant connections.