Cornering Lamp: Service and Repair

REMOVAL PROCEDURE
1. Remove the screw retaining the lamp.
2. Remove the lamp.
3. Remove the sockets and the bulbs from the lamp.

INSTALLATION PROCEDURE
1. Install the sockets and the bulbs to the lamp.
2. Install the screw in order to secure the lamp to the vehicle.
3. Align the cornering lamp with the headlamp. Leave a gap of 2 mm (5/64 in) between the cornering lamp and the headlamp.

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Tighten the screw.

Tighten
Tighten the screw to 2 N.m (18 lb in).