Hazard Warning Lamps

Battery positive voltage (B+) is applied at all times from the HAZARD Fuse via CKT 740 (ORN) through the hazard flasher to the normally open switch in the turn/hazard switch via CKT 27 (BRN). With the hazard switch in HAZARD, battery positive voltage (B+) is applied through the assembly to all four paths used by both front and rear turn lamps. All turn lamps and both indicators flash on and off. When in the HAZARD position, the turn circuit is opened within the turn/hazard switch and the hazard flasher controls the lamps even if a turn has been indicated.