Parking Lamp: Service and Repair

REMOVAL PROCEDURE
1. Remove the screw that retains the park/turn signal lamp.
2. Remove the lamp.
3. Remove the sockets and the bulbs from the lamp.

INSTALLATION PROCEDURE
1. Install the sockets and the bulbs to the park/turn signal lamp.
2. Install the screw in order to secure the lamp to the vehicle.
3. Align the cornering lamp with the headlamp. Leave a gap of 2 mm (5/64 in) between the cornering lamp and the headlamp.

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Tighten the screw.