Tail Lamp: Service and Repair

REMOVAL PROCEDURE
1. Loosen the screw (2) at the top of the tail lamp (3).
2. Pull outward on the top of the tail lamp (3) and pull upward in order to disengage the tab at the bottom of the tail lamp.
3. Disconnect the electrical connector (4) from the tail lamp (3).
4. Disconnect the fiber optic connector from the tail lamp (3).
5. Remove the tail lamp (3).

INSTALLATION PROCEDURE
1. Connect the electrical connector (4).
2. Connect the fiber optic connector.
3. Install the tail lamp (3).

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Install the screw (2).

Tighten
Tighten the screw to 1.5 N.m (13 lb in).