Installation Procedure

Description:

1. Install the inflatable restraint front end discriminating sensor (3) to the radiator support.

NOTICE: Refer to Fastener Notice.

2. Install the inflatable restraint front end discriminating sensor mounting fasteners (2).

Tighten
Tighten fastener to 11 N.m (98 lb.in).

Description:

3. Connect the inflatable restraint front end discriminating sensor harness connector (4) to the inflatable restraint front end discriminating sensor.

Description:

4. Install the Connector Position Assurance (CPA) (5) to the inflatable restraint front end discriminating sensor harness connector (4).
5. Enable the frontal SIR system. Refer to Enabling the SIR System.