Suspension Control ( Automatic - Electronic ): Adjustments

TRIM HEIGHT ADJUSTMENT
1. Check for rear position sensor DTCs (C1762 and C1763).

IMPORTANT: If DTCs are present, repair before continuing.

2. The vehicle must be on a level surface with doors closed, and with no passengers or extra weight in car.
3. Connect the scan tool to the Data Line Connector (DLC).
4. Turn the Ignition ON with the engine off.
5. Check the rear Continuously Variable Road Sensing Suspension (CVRSS) position sensor values using the scan tool to be sure they are within range. If not, check for bent CVRSS position sensor brackets or disconnected sensors.