Rear Power Window Switch

Battery voltage is supplied from the LH front power window switch to the rear power window switches through CKT 1307 (DK BLU). For commercial vehicles (RPO V4U), battery voltage is also supplied to terminal C of each connector C312 and C319. When the UP switch is pressed, voltage is applied to one terminal of the power window motor through CKT 668 (DK BLU) or CKT 670 (DK BLU/WHT). Ground is applied to the opposite terminal of the power window motor from the LH front power window switch through the rear power window switch on CKT 169 (PPL) and CKT 669 (BRN) or CKT 171 (PPL) and CKT 671 (BRN). When the DOWN switch is pressed, voltage is applied to one terminal of the power window motor through CKT 669 (BRN) or CKT 671 (BRN). Ground is applied to the opposite terminal of the power window motor from the LH front power window switch through the RH front power window switch on CKT 168 (DK GRN) and CKT 668 (DK BLU) or CKT 170 (LT GRN) and CKT 670 (DK BLU/WHT).