Memory Set

The Memory Mirror Module (MMM) receives the inputs from the memory function switch. The current seat, seatback, lumbar. and mirror positions may be recorded for two different drivers. To record the current positions, the SET MEMORY button is pressed, which is followed by a chime to acknowledge the input. Within 5 seconds, either the MEMORY-1 or MEMORY-2 button is pressed. When the MMM receives these inputs, it records the feedback voltages from the four mirror position sensors for the appropriate driver. A single chime is sounded to acknowledge that the position was recorded. It also sends a Class 2 message to the Memory Seat Module (MSM), informing it of the SET MEMORY command. The MSM then records the feedback voltages for all seat and lumbar position sensors for the appropriate driver. An easy exit position for each driver may also be recorded. To perform this function, refer to Memory Seats Diagnosis. Seats