Express Feature

The sunroof control module enters express open or express close vent mode when connector C2 terminal 6 is momentarily grounded through CKT 100 (BRN) by the sunroof switch. The module then applies voltage through CKT 129 (LT ORN) and ground through CKT 127 (DK ORN) to the sunroof actuator. The sunroof control module drives the sunroof actuator until one of the following actions occur:
^ Motor stall is sensed.
^ The sunroof switch is moved to the FORWARD/OPEN VENT position.
^ The sunroof switch is moved to the REVERSE/CLOSE VENT position.
^ The control module times out (20 seconds after the start of the express mode).
^ The limit switch is closed.