Instrument Panel Switch Bank Replacement

REMOVAL PROCEDURE
1. Remove the IP storage compartment.
2. Release the retainers fastening the instrument panel storage compartment switch plate bezel. Remove the bezel.
3. Squeeze the switch retainers.
Pry out the switch from the instrument panel storage compartment.
Remove the necessary switch.
^ Rear compartment lid release enable switch
^ IP storage compartment lamp switch
^ Traction control switch

INSTALLATION PROCEDURE
1. Install the switch to the instrument panel storage compartment switch hole.
Push the switch inward to fasten.
2. Align the instrument panel storage compartment switch plate bezel to the storage compartment. Push inward to fasten the bezel.
3. Install the IP storage compartment.