Closing, Venting

When the sunroof switch is held in the REVERSE/CLOSE VENT position, connector C2 terminal 7 of the sunroof control module is grounded through CKT 110 (ORN) by the sunroof switch. The control module then applies voltage through CKT 127 (DK GRN) and ground through CKT 129 (LT ORN) to the sunroof actuator assembly. The sunroof control module drives the sunroof actuator until one of the following actions occurs:
^ Motor stall is sensed.
^ The sunroof switch is returned to the neutral position.
^ The limit switch is closed.
^ The control module times out (20 seconds after the start of the REVERSE/CLOSE VENT command.