Cruise Control Module

The following components are contained in the cruise control module:
^ An electric controller
^ An electric stepper motor

The controller performs the following functions:
^ Monitors the vehicle speed
^ Operates the electric stepper motor

In response to the controller, the stepper motor moves a connecting strap that attaches to the cruise control cable. The cable moves the throttle linkage in order to vary the throttle position in order to maintain the desired vehicle speed. The cruise control module contains a low speed limit that prevents the system engagement below a minimum speed of approximately 40 km/h (25 mph). The module is controlled by switches located on the multifunction lever. Cruise control is in the standby disabled mode until all of the conditions that are inconsistent with the cruise control operation are cleared.