Headlamp: Service and Repair

REMOVAL PROCEDURE




1. Remove the upper filler panel.
2. Remove the cornering lamp assembly (2).




3. Remove the 3 bolts (3) retaining the headlamp housing (2) to the bracket.
4. Disconnect the electrical connector.
5. Remove the headlamp housing (2).




6. Remove the headlamp bulb (3) from the headlamp housing (2).

INSTALLATION PROCEDURE




1. Install the headlamp bulb (3) to the headlamp housing (2).
2. Connect the electrical connector to the headlamp.




3. Install the 3 bolts (3) in order to retain the headlamp housing (2) to the bracket.




4. Install the cornering lamp housing (2).
5. Install the upper filler panel.