Side Impact Sensor Replacement

Description:

REMOVAL
1. Disable SIR system. Refer to Disabling the SIR System
2. Remove front door trim panel.
3. Remove front door water deflector.
4. Disconnect Inflatable Restraint Side Impact Sensor electrical connector.
5. Remove two Torx(R) headed screws.
6. Remove sensor from mounting plate.

INSTALLATION
1. Install sensor to mounting plate.
2. Install two Torx(R) headed screws.

Tighten
Tighten Inflatable Restraint Side Impact screws to 5 N.m (45 lb in).

3. Connect Inflatable Restraint Side Impact Sensor electrical connector.
4. Install front door water deflector.
5. Install front door trim panel.
6. Enable SIR system. Refer to Enabling the SIR System.