Garage Door Opener (GDO) - Training Universal for Rolling Code Procedure

This procedure is for training the customer's rolling code garage door openers to their GDO transmitter. The GDO must already be programmed to their hand-held transmitter. The training process below must be completed within 30 seconds or it must be repeated.
1. Locate the train button on the garage door opener receiver. (Reference the operators manual for the garage door opener or call 1-800-355-3515 for assistance). Follow instructions for the garage door opener to know when the unit is in train mode.
2. Return to the GDO transmitter in the vehicle and press the button that you want programmed three times for one second each time.
3. Re-press to verify that the GDO transmitter has been programmed.

You may use either the hand-held transmitter or the GDO to open the garage door.

The GDO is compatible with most, but not all types and brands of transmitters. If a problem should occur with a compatibility conflict with a transmitter, call HomeLinkTM at 1-800-355-3515.