60. Accumulator Housing Disassemble

1. Remove the following parts: The two snap rings (349) from the top side of the accumulator housing (944) The 1-2 accumulator assembly (968-970, 973) The 3-4 accumulator assembly (975-977, 950)
2. Inspect the accumulator pistons for scratches or damage. Inspect the accumulator piston pins for scoring.





3. Remove the following parts:
- The five 8-mm cover bolts (966)
- The accumulator housing cover (965)
- The gasket (964)
- The forward accumulator assembly (960-963)
- The reverse accumulator assembly (946-949)

4. Inspect the accumulator pistons (946, 960) and the accumulator piston pins (948, 962) for scoring or damage.