Instrument Panel (IP) - Trim Panel Replacement - Right

REMOVAL PROCEDURE
1. Remove the upper trim panel.
2. Remove the Instrument panel cluster.
3. Remove the 2 outside fasteners (5) that retain the right hand trim panel.
4. Remove the 2 fasteners from the top of the right hand trim panel.
5. Release the 1 hook and loop patch (6) from the backside of the right hand trim panel (7).
6. Remove the trim panel (7).

INSTALLATION PROCEDURE
1. Align the right hand trim panel (7) into position.
2. Install the trim panel (7).

In order to secure the hook and loop patch press into place.
3. Install the 2 fasteners at the top center of the right trim panel.
4. Install the 2 outside fasteners (5) in order to retain the right hand trim panel (7).
5. Install the Instrument panel cluster.
6. Install the upper trim panel.