Mirror Cover Replacement - Outside Opening

REMOVAL PROCEDURE



1. Remove the door trim panel.
2. Remove the outside mirror assembly.
3. Remove the following components retaining the mucket (4):
^ Two fasteners (2)
^ One retainer (3)
4. Lift up the mucket (4) in order to remove the mucket.

INSTALLATION PROCEDURE



1. Raise the window to the full up position.

IMPORTANT: Ensure that the mucket (1) overlaps the door window a minimum of 3 mm (0.125 in).

2. Install the mucket (1) to the door.




3. Install the following components in order to retain the mucket (4):
^ Two fasteners (2)
^ One retainer (3)
4. Install the outside mirror assembly.
5. Install the door trim panel.