Low Beam Operation With the Headlamp Switch

When the headlamp switch is in the HEAD position, the instrument cluster headlamp switch input is grounded through CKT 10 (YEL) and the headlamp switch. The instrument cluster sends a request through the Class 2 serial data line to the PZM in order to active the low beam headlamps. The PZM supplies positive battery voltage (B +) to the coil side of the headlamp relay via CKT 352 (WHT). The coil receives ground through the headlamp switch via CKT 10 (YEL). The coil of the headlamp relay is then energized, closing the switch contacts. Battery positive voltage (B +) is then applied through the high/low beam headlamp relay via CKT 1346 (LT BLU) and the L HDLP LO fuse and R HDLP LO fuse via CKT 12 (TAN) to the left and the right low beam headlamps respectively.