| Bearing Journal Diameter | | 1.061 - 1.062 Inch (in) |
| Bearing Bore Diameter (In Head) | | 1.064 Inch (in) |
| Bearing Clearance | | 0.002 - 0.003 Inch (in) |
| New Limits | | 0.002 - 0.0036 Inch (in) |
| Worn Limits (Not Over) | | 0.0036 Inch (in) |
| Out-of-Round (Not Over) | | 0.0005 Inch (in) |
| Valve Timing (With Ramp at 0.100 mm Lift) | Intake Opens | 8 Degrees Before Top Dead Center (deg BTDC) |
| Intake Closes | 55 Degrees After Bottom Dead Center (deg ABDC) |
| Exhaust Opens | 51 Degrees Before Bottom Dead Center (deg BBDC) |
| Exhaust Closes | 13 Degrees After Top Dead Center (deg ATDC) |
| Valve Lift | Intake | 0.339 Inch (in) |
| Exhaust | 0.339 Inch (in) |
| Camshaft Material | | Hardened Cast Grey Iron |
| Bearing Number | | 5 |
| Bearing Number on Left Hand Intake | | 6 |
| Duration (@ 0.100 mm Lift), Intake | | 243 degrees |
| Exhaust | | 244 degrees |
| Valve Overlap (@ 0.100 mm Lift) | | 22 degrees |