Automatic Door Lock (ADL) Feature
PERSONALIZATION OF THE RKEThe automatic door lock feature enables under the following conditions:
^ The ignition switch is in the RUN position.
^ All the vehicle doors are CLOSED.
^ The vehicle shifts out of the PARK position.
The BCM receives a signal from the RFA to either enable or disable the automatic door lock feature. Use one of the following two different ways to program the automatic door lock feature:
^ Use the option register (the dealership uses a scan tool to program the automatic door lock feature) to enable or disable the automatic door lock feature for all FOBs together only.
^ The BCM is able to differentiate between up to 4 FOBs.
^ Perform the following steps to program the automatic door lock feature using the FOBs:
1. Ensure the ignition switch is in the RUN position.
2. Ensure the gear shift lever is in the PARK position.
3. Press the brake pedal for the entire duration of the procedure.
4. Press the transmitter UNLOCK button 4 times within 5 seconds to disable the automatic door lock feature.
5. Press the transmitter LOCK button 4 times within 5 seconds to enable the automatic door lock feature.