Removal and Replacement
Headlamp Capsule ReplacementREMOVAL PROCEDURE
1. Open the hood.
2. Unscrew the self-locking tab from the appropriate radiator cover.
3. Unclip the self-locking tab from the body.
4. Remove the headlamp filler trim screw.
5. Angle out the lower headlamp tiller trim to release the locking tab.
6. Remove the headlamp filler trim.
7. Remove the electrical connection from the headlamp.
8. Remove the turn signal bulb socket from the headlamp.
9. Remove the three headlamp screws.
10. Remove the headlamp.
11. Transfer the high beam bulb.
12. Transfer the low beam bulb.
INSTALLATION PROCEDURE
1. Install the headlamp.
2. Install the three headlamp screws.
Tighten
Tighten the three headlamp screws until fully seated. Ensure not to strip the three headlamp screws.
3. Install the turn signal bulb socket to the headlamp.
4. Install the electrical connection to the headlamp.
5. Angle in the locking tab to install the headlamp filler trim.
6. Install the headlamp filler trim screw.
Tighten
Tighten the headlamp tiller trim screw until fully seated. Ensure not to strip the headlamp filler trim screw. Ensure not to strip the plastic insert.
7. Seat the tab to the body of the appropriate radiator cover.
8. Secure the radiator cover by turning the self-locking tab.
9. Close the hood.