Turn Signal Bulb: Service and Repair
[1][2]Turn Signal Lamp Bulb Replacement - RearREMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Open the storage/cd player door (3) if replacing the passenger side [1][2]turn signal lamp bulb.
3. Remove the spare tire if replacing the driver's side [1][2]turn signal lamp bulb.
4. Disconnect the electrical connection
5. Remove the tail/[1][2]turn signal lamp bulb socket assembly by:
Depressing on the tab located in the center of the socket assembly.
6. Remove the tail/turn signal lamp socket assembly.
7. Remove the turn signal bulb from the socket.
INSTALLATION PROCEDURE
1. Install the turn signal bulb to the socket.
2. Install the tail/turn signal socket assembly by snapping into place.
3. Connect the electrical connection.
4. Install the spare tire if replacement of the driver's side [1][2]turn signal lamp bulb was performed.
5. Close the storage/cd player door (3) if replacement of the passenger side [1][2]turn signal lamp bulb was performed.
6. Close the rear compartment lid.