Coaxial Cable Installation Procedure

1. Install the coaxial cable to the cellular telephone module and the RF booster, if equipped.
2. Route the coaxial cable to the interior coupling box.
3. Install the defogger module ground bolt through the coaxial cable hold down.
4. Install the defogger ground bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Torque the bolt to 1.6 N.m (14 lb in).

5. Install the rear compartment trim.
6. Install the rear shelf carrier panel.
7. Install the rear shelf panel.
8. Install the sail panel.
9. Install the rear seat back.

For a description of the RPO Code(s) shown in this image/article refer to the RPO Code List found at Vehicle/Application ID RPO Codes