Antenna Module Replacement

REMOVAL PROCEDURE
1. Remove the headliner.
2. Disconnect the electrical connectors (2) and the coaxial cable (4,5) from the AM/FM antenna module (1).
3. Remove the fastener (3) retaining the AM/FM antenna module to the roof beam.
4. Remove the AM/FM antenna module (1).

INSTALLATION PROCEDURE
1. Install the AM/FM antenna module (1) to the roof beam, ensuring that the alignment tab is properly located.
2. Install AM/FM antenna module retaining fastener (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Torque the antenna module fastener (3) to 6 N.m (53 lb in).

3. Connect the electrical connectors (2) and the coaxial cables (4,5) to the AM/FM antenna module (1).
4. Install the headliner.