Cellular Telephone Docking Station Replacement (DTS)

REMOVAL PROCEDURE
1. Open console lid in order to access cellular telephone.
2. Remove the cellular telephone from the docking cup (2).
3. Disconnect the electrical connections from the cellular phone.
4. Remove the fasteners (1) retaining the docking cup (2) to the console tray.
5. Remove the docking cup (2) from the console.

INSTALLATION PROCEDURE
1. Install the docking cup (2) to the console tray.
2. Install the phone docking cup fasteners (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the fasteners (1) to 1.6 N.m (14 lb in).

3. Connect the electrical connections to the cellular phone.
4. Install the cellular phone to the docking cup (2).
5. Close the console lid.