Instrument Panel (IP) - Outer Trim Cover Replacement - Left

Instrument Panel Outer Trim Cover Replacement - Left Side

Removal Procedure





1. Insert flat bladed tool between the IP outer trim cover (1) and the IP and pull out on the IP outer trim cover (1) while leashing the retainer (2) with the flat bladed tool.
2. Slide the left IP outer trim cover (1) out of the tabs at the front edge of the IP and remove the outer trim cover (1).



Installation Procedure





1. Align the tabs on the front edge of the left IP outer trim cover (1) to the slots in the IP.
2. Push towards the IP in order to engage the IP outer trim cover (1) retainer (2).