Procedures

REMOVAL PROCEDURE




1. Place the window in the full up position.
2. Remove the front door trim panel.
3. Remove the door module.
4. Remove the water deflector.
5. Remove the outside door handle.
6. Remove the E-clip on the lock cylinder to remove the lock rod and arm.
7. Open the clamp at the door handle in order to release the lock cylinder from the retaining clip.
8. Remove the lock cylinder from the backside of the door handle.

INSTALLATION PROCEDURE




1. Snap the lock cylinder into the outside door handle from the backside.
2. Install the lock cylinder rod and arm to the lock cylinder with the E-clip.
3. Install the outside door handle.
4. Install the water deflector.
5. Install the door module.
6. Install the front door trim panel.