Blower Motor and Fan Replacement - Auxiliary
REMOVAL PROCEDURECAUTION: Refer to SIR Service Precautions Caution in Service Precautions.
1. Remove the instrument panel (IP)
2. Remove the left and right carpet retainers.
3. Remove the front carpeting in order to access the rear ducts.
4. Remove the ducts from the rear blower/IP center support assembly (1,2).
5. Remove the fasteners (3) retaining the rear blower/IP center support assembly (1,2) to the floor.
6. Remove the rear blower/IP center support assembly from the vehicle.
7. Remove the rear blower motor.
INSTALLATION PROCEDURE
1. Install the rear blower motor to the IP center support assembly.
2. Install the rear blower/IP center support.
3. Install the fasteners (3) that retain the rear blower/IP center support assembly (1,2) to the vehicle floor
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Torque the fasteners (3) to 9 N.m (80 lb in).
4. Install the ducts to the rear blower/IP center support assembly.
5. Install the front carpeting.
6. Remove the left and right carpet retainers.
7. Install the instrument panel (IP).