Instrument Panel (IP) - Air Deflector/Louver Replacement

REMOVAL PROCEDURE

IMPORTANT: The air outlet vents are not interchangeable, note vent location during removal.




1. Grasp the center of the air outlet vent.
2. Using a small flat bladed tool, release the retainers (1) on the inside of the air outlet vent at the top and the bottom of the air outlet housing.




3. Remove the air outlet vents (1,2,3 or 4).

INSTALLATION PROCEDURE




1. Align the air outlet vent (1,2,3 or 4) to the IP opening.
2. Push the air outlet vent (1,2,3, or 4) into the opening until the retainers are engaged.
3. Check for proper operation and movement.