Analog (UY9)

The IPC determines the proper pointer position on the engine coolant temperature gauge in order to display the relative engine coolant temperature. The engine coolant temperature gauge is labeled C on the left for cold, less than 32°C (90°F) and H on the right for hot, greater than 128°C (262°F). The gauge will be at the center position when the engine coolant is at the nominal temperature, between 88-104°C (190-219°F). The DSPL MODE button on the DIC is used to turn the display ON and OFF. The display will be ON when the speedometer gauge is ON and OFF when the speedometer gauge is OFF.

For a description of the RPO Code(s) shown in this article refer to the RPO Code List found at Vehicle/Application ID RPO Codes