Outside Air Temperature

The outside air temperature parameter may only be displayed on the analog (UY9) PC. The outside air temperature parameter value is supplied by the instrument Panel Integration Module (IPM) to the IPC via class 2 serial data messages. The outside air temperature parameter cannot be reset by the driver. The outside air temperature parameter is displayed on the DIC in one of the following formats:
^ XXX °F OUTSIDE TEMP
^ XXX °C OUTSIDE TEMP

The XXX represents the supplied temperature value. The units of the display will correspond to the current instrument cluster setting.

For a description of the RPO Code(s) shown in this image/article refer to the RPO Code List found at Vehicle/Application ID RPO Codes